Catalogue ID | Item name | Choose |
---|
Implants and instruments for traumatology and orthopaedy |
Osteosynthesis |
01.100.20 | Coritical screw d=4,5 mm L=20 mm | |
01.100.28 | Coritical screw d=4,5 mm L=28 mm | |
01.100.32 | Coritical screw d=4,5 mm L=32 mm | |
01.100.38 | Coritical screw d=4,5 mm L=38 mm | |
01.100.44 | Coritical screw d=4,5 mm L=44 mm | |
01.100.50 | Coritical screw d=4,5 mm L=50 mm | |
01.100.55 | Coritical screw d=4,5 mm L=55 mm | |
01.100.60 | Coritical screw d=4,5 mm L=60 mm | |
01.101.25 | Cancellous screw d=6,5 mm with the thread 16 mm L=25 mm | |
01.101.30 | Cancellous screw d=6,5 mm with the thread 16 mm L=30 mm | |
01.101.35 | Cancellous screw d=6,5 mm with the thread 16 mm L=35 mm | |
01.101.40 | Cancellous screw d=6,5 mm with the thread 16 mm L=40 mm | |
01.101.45 | Cancellous screw d=6,5 mm with the thread 16 mm L=45 mm | |
01.101.50 | Cancellous screw d=6,5 mm with the thread 16 mm L=50 mm | |
01.101.55 | Cancellous screw d=6,5 mm with the thread 16 mm L=55 mm | |
01.101.60 | Cancellous screw d=6,5 mm with the thread 16 mm L=60 mm | |
01.101.65 | Cancellous screw d=6,5 mm with the thread 16 mm L=65 mm | |
01.101.70 | Cancellous screw d=6,5 mm with the thread 16 mm L=70 mm | |
01.101.75 | Cancellous screw d=6,5 mm with the thread 16 mm L=75 mm | |
01.101.80 | Cancellous screw d=6,5 mm with the thread 16 mm L=80 mm | |
01.101.85 | Cancellous screw d=6,5 mm with the thread 16 mm L=85 mm | |
01.101.90 | Cancellous screw d=6,5 mm with the thread 16 mm L=90 mm | |
01.101.95 | Cancellous screw d=6,5 mm with the thread 16 mm L=95 mm | |
01.101.100 | Cancellous screw d=6,5 mm with the thread 16 mm L=100 mm | |
01.101.105 | Cancellous screw d=6,5 mm with the thread 16 mm L=105 mm | |
01.101.110 | Cancellous screw d=6,5 mm with the thread 16 mm L=110 mm | |
01.101.115 | Cancellous screw d=6,5 mm with the thread 16 mm L=115 mm | |
01.101.120 | Cancellous screw d=6,5 mm with the thread 16 mm L=120 mm | |
01.101.40 | Cancellous screw d=6,5 mm with the thread 32 mm L=40 mm | |
01.101.45 | Cancellous screw d=6,5 mm with the thread 32 mm L=45 mm | |
01.101.50 | Cancellous screw d=6,5 mm with the thread 32 mm L=50 mm | |
01.101.55 | Cancellous screw d=6,5 mm with the thread 32 mm L=55 mm | |
01.101.60 | Cancellous screw d=6,5 mm with the thread 32 mm L=60 mm | |
01.101.65 | Cancellous screw d=6,5 mm with the thread 32 mm L=65 mm | |
01.101.70 | Cancellous screw d=6,5 mm with the thread 32 mm L=70 mm | |
01.101.75 | Cancellous screw d=6,5 mm with the thread 32 mm L=75mm | |
01.101.80 | Cancellous screw d=6,5 mm with the thread 32 mm L=80 mm | |
01.101.85 | Cancellous screw d=6,5 mm with the thread 32 mm L=85 mm | |
01.101.90 | Cancellous screw d=6,5 mm with the thread 32 mm L=90 mm | |
01.101.95 | Cancellous screw d=6,5 mm with the thread 32 mm L=95 mm | |
01.101.100 | Cancellous screw d=6,5 mm with the thread 32 mm L=100 mm | |
01.101.105 | Cancellous screw d=6,5 mm with the thread 32 mm L=105 mm | |
01.101.110 | Cancellous screw d=6,5 mm with the thread 32 mm L=110 mm | |
01.101.90-01 | Cancellous screw d=6 mm (for wrench S=4) L=90 mm | |
01.101.100-01 | Cancellous screw d=6 mm (for wrench S=4) L=100 mm | |
01.101.110-01 | Cancellous screw d=6 mm (for wrench S=4) L=110 mm | |
01.102.25 | Malleolar screw d=4,5 mm L=25 mm | |
01.102.30 | Malleolar screw d=4,5 mm L=30 mm | |
01.102.35 | Malleolar screw d=4,5 mm L=35 mm | |
01.102.40 | Malleolar screw d=4,5 mm L=40 mm | |
01.102.45 | Malleolar screw d=4,5 mm L=45 mm | |
01.102.50 | Malleolar screw d=4,5 mm L=50 mm | |
01.102.55 | Malleolar screw d=4,5 mm L=55 mm | |
01.102.60 | Malleolar screw d=4,5 mm L=60 mm | |
01.102.65 | Malleolar screw d=4,5 mm L=65 mm | |
01.102.70 | Malleolar screw d=4,5 mm L=70 mm | |
01.103.70 | Plate for the osteosynthesis L=70 mm | |
01.103.100 | Plate for the osteosynthesis L=100 mm | |
01.103.115 | Plate for the osteosynthesis L=115 mm | |
01.103.120 | Plate for the osteosynthesis L=120 mm | |
01.103.130 | Plate for the osteosynthesis L=130 mm | |
01.103.140 | Plate for the osteosynthesis L=140 mm | |
01.103.160 | Plate for the osteosynthesis L=160 mm | |
01.103.200 | Plate for the osteosynthesis L=200 mm | |
01.103.220 | Plate for the osteosynthesis L=220 mm | |
01.103.240 | Plate for the osteosynthesis L=240 mm | |
01.103.50 | Plate with restricted contact L=50 mm | |
01.103.70-01 | Plate with restricted contact L=70 mm | |
01.103.90 | Plate with restricted contact L=90 mm | |
01.104.070-15 | Conical rod d=6 mm with the thread on the tail piece L=70 /25 mm | |
01.104.080-25 | Conical rod d=6 mm with the thread on the tail L=80 /30 mm | |
01.104.100-35 | Conical rod d=6 mm with the thread on the tail L=100 /30 mm | |
01.104.120-35 | Conical rod d=6 mm with the thread on the tail L=120 /35 mm | |
01.104.120-40 | Conical rod d=6 mm with the thread on the tail L=120 /40 mm | |
01.104.140-40 | Conical rod d=6 mm with the thread on the tail L=140 /40 mm | |
01.104.140-45 | Conical rod d=6 mm with the thread on the tail L=140 /45 mm | |
01.104.160-45 | Conical rod d=6 mm with the thread on the tail L=160 /50 mm | |
01.104.180 | Conical rod d=6 mm with the thread on the tail L=180 /55 mm | |
01.104.200 | Conical rod d=6 mm with the thread on the tail L=200 /60 mm | |
01.104.220 | Conical rod d=6 mm with the thread on the tail L=220 /60 mm | |
01.105.000 | Transegmental rod | |
01.105.070-15 | Conical rod d=4,5 mm L=70 /25 mm | |
01.105.080-25 | Conical rod d=4,5 mm L=80 /30 mm | |
01.105.100-35 | Conical rod d=4,5 mm L=100 /30 mm | |
01.105.120-35 | Conical rod d=4,5 mm L=120 /35 mm | |
01.105.120-40 | Conical rod d=4,5 mm L=120 /40 mm | |
01.105.140-40 | Conical rod d=4,5 mm L=140 /40 mm | |
01.105.140-45 | Conical rod d=4,5 mm L=140 /45 mm | |
01.105.160-45 | Conical rod d=4,5 mm L=160 /45 mm | |
01.105.070-15 | Conical rod d=5 mm L=70 /25 mm | |
01.105.080-25 | Conical rod d=5 mm L=80 /30 mm | |
01.105.100-35 | Conical rod d=5 mm L=100 /30 mm | |
01.105.120-35 | Conical rod d=5 mm L=120 /35 mm | |
01.105.120-40 | Conical rod d=5 mm L=120 /40 mm | |
01.105.140-40 | Conical rod d=5 mm L=140 /40 mm | |
01.105.140-45 | Conical rod d=5 mm L=140 /45 mm | |
01.105.160-45 | Conical rod d=5 mm L=160 /50 mm | |
01.105.070-15 | Conical rod d=6 mm L=70 /25 mm | |
01.105.080-25 | Conical rod d=6 mm L=80 /30 mm | |
01.105.100-35 | Conical rod d=6 mm L=100 /30 mm | |
01.105.120-35 | Conical rod d=6 mm L = 120 /35 mm | |
01.105.120-40 | Conical rod d=6 mm L=120 /40 mm | |
01.105.140-40 | Conical rod d=6 mm L=140 /40 mm | |
01.105.140-45 | Conical rod d=6 mm L=140 /45 mm | |
01.105.160-45 | Conical rod d=6 mm L=160 /50 mm | |
01.105.180 | Conical rod d=6 mm L=180 /55 mm | |
01.105.200 | Conical rod d=6 mm L=200 /60 mm | |
01.105.220 | Conical rod d=6 mm L=220 /60 mm | |
01.106.360-1 | Four-sided bayonet-shaped pin d=8, L=360 mm | |
01.106.380-1 | Four-sided bayonet-shaped pin d=8, L=380 mm | |
01.106.360-2 | Four-sided bayonet-shaped pin d=9, L=360 mm | |
01.106.380-2 | Four-sided bayonet-shaped pin d=9, L=380 mm | |
01.106.360-3 | Four-sided bayonet-shaped pin d=10, L=360 mm | |
01.106.380-3 | Four-sided bayonet-shaped pin d=10, L=380 mm | |
01.106.400-1 | Four-sided bayonet-shaped pin d=10, L=400 mm | |
01.106.420-1 | Four-sided bayonet-shaped pin d=10, L=420 mm | |
01.106.360-4 | Four-sided bayonet-shaped pin d=11, L=360 mm | |
01.106.380-4 | Four-sided bayonet-shaped pin d=11, L=380 mm | |
01.106.400-2 | Four-sided bayonet-shaped pin d=11, L=400 mm | |
01.106.420-2 | Four-sided bayonet-shaped pin d=11, L=420 mm | |
01.106.360-5 | Four-sided bayonet-shaped pin d=12, L=360 mm | |
01.106.380-5 | Four-sided bayonet-shaped pin d=12, L=380 mm | |
01.106.400-3 | Four-sided bayonet-shaped pin d=12, L=400 mm | |
01.106.420-3 | Four-sided bayonet-shaped pin d=12, L=420 mm | |
01.106.360-6 | Four-sided bayonet-shaped pin d=13, L=360 mm | |
01.106.380-6 | Four-sided bayonet-shaped pin d=13, L=380 mm | |
01.106.400-4 | Four-sided bayonet-shaped pin d=13, L=400 mm | |
01.106.420-4 | Four-sided bayonet-shaped pin d=13, L=420 mm | |
01.106.440-1 | Four-sided bayonet-shaped pin d=13, L=440 mm | |
01.106.360-7 | Four-sided bayonet-shaped pin d=14, L=360 mm | |
01.106.380-7 | Four-sided bayonet-shaped pin d=14, L=380 mm | |
01.106.400-5 | Four-sided bayonet-shaped pin d=14, L=400 mm | |
01.106.420-5 | Four-sided bayonet-shaped pin d=14, L=420 mm | |
01.106.440-2 | Four-sided bayonet-shaped pin d=14, L=440 mm | |
01.107.180-1 | Bogdanov’s rod L=180 mm /3õ1 | |
01.107.180-2 | Bogdanov’s nail L=180 mm /3õ2 | |
01.107.210-1 | Bogdanov’s nail L=210 mm /2õ2 | |
01.107.210-2 | Bogdanov’s nail L=210 mm /3õ2 | |
01.107.210-3 | Bogdanov’s nail L=210 mm /4õ3 | |
01.107.230 | Bogdanov’s nail L=230 mm /3õ2 | |
01.107.250-1 | Bogdanov’s nail L=250 mm /3õ2 | |
01.107.250-2 | Bogdanov’s nail L=250 mm /4õ2 | |
01.107.250-3 | Bogdanov’s nail L=250 mm /5õ2 | |
01.107.250-4 | Bogdanov’s nail L=250 mm /5õ3 | |
01.107.250-5 | Bogdanov’s nail L=250 mm /5õ4 | |
01.107.260-1 | Bogdanov’s nail L=260 mm /3õ2 | |
01.107.260-2 | Bogdanov’s nail L=260 mm /5õ2 | |
01.107.260-3 | Bogdanov’s nail L=260 mm /4õ3 | |
01.107.260-4 | Bogdanov’s nail L=260 mm /5õ3 | |
01.108.120-1 | Angle plate 120 degrees L=72 /60 mm | |
01.108.120-2 | Angle plate 120 degrees L=72 /70 mm | |
01.108.120-3 | Angle plate 120 degrees L=72 /80 mm | |
01.108.120-4 | Angle plate 120 degrees L=72 /90 mm | |
01.108.120-5 | Angle plate 120 degrees L=72 /100 mm | |
01.108.120-6 | Angle plate 120 degrees L=104 /60 mm | |
01.108.120-7 | Angle plate 120 degrees L=104 /70 mm | |
01.108.120-8 | Angle plate 120 degrees L=104 /80 mm | |
01.108.120-9 | Angle plate 130 degrees L=104 /90 mm | |
01.108.130-1 | Angle plate 130 degrees L=72 /60 mm | |
01.108.130-2 | Angle plate 130 degrees L=72 /70 mm | |
01.108.130-3 | Angle plate 130 degrees L=72 /80 mm | |
01.108.130-4 | Angle plate 130 degrees L=72 /90 mm | |
01.108.130-5 | Angle plate 130 degrees L=72 /100 mm | |
01.108.130-6 | Angle plate 130 degrees L=104 /60 mm | |
01.108.130-7 | Angle plate 130 degrees L=104 /70 mm | |
01.108.130-8 | Angle plate 130 degrees L=104 /80 mm | |
01.108.130-9 | Angle plate 130 degrees L=104 /90 mm | |
01.108.135-1 | Angle plate 135 degrees L=72 /60 mm | |
01.108.135-2 | Angle plate 135 degrees L=72 /70 mm | |
01.108.135-3 | Angle plate 135 degrees L=72 /80 mm | |
01.108.135-4 | Angle plate 135 degrees L=72 /90 mm | |
01.108.135-5 | Angle plate 135 degrees L=72 /100 mm | |
01.108.135-6 | Angle plate 135 degrees L=104 /60 mm | |
01.108.135-7 | Angle plate 135 degrees L=104 /70 mm | |
01.108.135-8 | Angle plate 135 degrees L=104 /80 mm | |
01.108.135-9 | Angle plate 135 degrees L=104 /90 mm | |
01.108.140-1 | Angle plate 140 degrees L=72 /60 mm | |
01.108.140-2 | Angle plate 140 degrees L=72 /70 mm | |
01.108.140-3 | Angle plate 140 degrees L=72 /80 mm | |
01.108.140-4 | Angle plate 140 degrees L=72 /90 mm | |
01.108.140-5 | Angle plate 140 degrees L=72 /100 mm | |
01.108.140-6 | Angle plate 140 degrees L=104 /60 mm | |
01.108.140-7 | Angle plate 140 degrees L=104 /70 mm | |
01.108.140-8 | Angle plate 140 degrees L=104 /80 mm | |
01.108.140-9 | Angle plate 140 degrees L=104 /90 mm | |
01.108.145-1 | Angle plate 145 degrees L=72 /60 mm | |
01.108.145-2 | Angle plate 145 degrees L=72 /70 mm | |
01.108.145-3 | Angle plate 145 degrees L=72 /80 mm | |
01.108.145-4 | Angle plate 145 degrees L=72 /90 mm | |
01.108.145-5 | Angle plate 145 degrees L=72 /100 mm | |
01.108.145-6 | Angle plate 145 degrees L=104 /60 mm | |
01.108.145-7 | Angle plate 145 degrees L=104 /70 mm | |
01.108.145-8 | Angle plate 145 degrees L=104 /80 mm | |
01.108.145-9 | Angle plate 145 degrees L=104 /90 mm | |
01.108.150-1 | Angle plate 150 degrees L=72 /60 mm | |
01.108.150-2 | Angle plate 150 degrees L=72 /70 mm | |
01.108.150-3 | Angle plate 150 degrees L=72 /80 mm | |
01.108.150-4 | Angle plate 150 degrees L=72 /90 mm | |
01.108.150-5 | Angle plate 150 degrees L=72 /100 mm | |
01.108.150-6 | Angle plate 150 degrees L=104 / 60 mm | |
01.108.150-7 | Angle plate 150 degrees L=104 /70 mm | |
01.108.150-8 | Angle plate 150 degrees L=104 /80 mm | |
01.108.150-9 | Angle plate 150 degrees L=104 /90 mm | |
01.109.097 | Angle plate 95 degrees L=97 /55 mm | |
01.109.106 | Angle plate 95 degrees L=106 /60 mm | |
01.109.120 | Angle plate 95 degrees L=120 /65 mm | |
01.109.160 | Angle plate 95 degrees L=160 /70 mm | |
01.110.097 | Angle plate 95 degrees L=97 /55 mm | |
01.110.106 | Angle plate 95 degrees L=106 /60 mm | |
01.110.120 | Angle plate 95 degrees L=120 /65 mm | |
01.110.160 | Angle plate 95 degrees L=160 /70 mm | |
01.111.100 | L-shaped plate L=100 mm | |
01.111.120 | L-shaped plate L=120 mm | |
01.111.140 | L-shaped plate L=140 mm | |
01.112.88 | The “clover’s leaf” plate L=88 mm | |
01.112.104 | The “clover’s leaf” plateL=104 mm | |
01.113.68 | Ò-shaped plate L=68 mm | |
01.113.84 | Ò-shaped plate L=84 mm | |
01.113.100 | Ò-shaped plate L=100 mm | |
01.113.116 | Ò-shaped plate L=116 mm | |
01.113.132 | Ò-shaped plate L=132 mm | |
01.113.148 | Ò-shaped plate L=148 mm | |
01.114.054 | Plate 1/3 tubular L=54 mm | |
01.114.080 | Plate 1/3 tubular L=80 mm | |
01.114.106 | Plate 1/3 tubular L=106 mm | |
01.115.080 | Ò-shaped plate L=80 mm | |
01.115.100 | Ò-shaped plate L=100 mm | |
01.115.115 | Ò-shaped plate L=115 mm | |
01.116.59 | Plate for the osteosynthesis of pelvic bones (straight – 4 holes) | |
01.116.91 | Plate for the osteosynthesis of pelvic bones (straight – 6 holes) | |
01.116.123 | Plate for the osteosynthesis of pelvic bones (straight – 8 holes) | |
01.116.155 | Plate for the osteosynthesis of pelvic bones (straight – 10 holes) | |
01.116.187 | Plate for the osteosynthesis of pelvic bones (straight – 12 holes) | |
01.116.219 | Plate for the osteosynthesis of pelvic bones (straight – 14 holes) | |
01.117.57 | Plate for the osteosynthesis of pelvic bones (curved R=88 mm – 4 holes) | |
01.117.86 | Plate for the osteosynthesis of pelvic bones (curved R=88 mm – 6 holes) | |
01.117.111 | Plate for the osteosynthesis of pelvic bones (curved R=88 mm – 8 holes) | |
01.117.132 | Plate for the osteosynthesis of pelvic bones (curved R=88 mm – 10 holes) | |
01.117.147 | Plate for the osteosynthesis of pelvic bones (curved R=88 mm – 12 holes) | |
01.117.157 | Plate for the osteosynthesis of pelvic bones (curved R=88 mm 14 holes) | |
01.117.58 | Plate for the osteosynthesis of pelvic bones (curved R=108 mm – 4 holes) | |
01.117.88 | Plate for the osteosynthesis of pelvic bones (curved R=108 mm – 6 holes) | |
01.117.115 | Plate for the osteosynthesis of pelvic bones (curved R=108 mm – 8 holes) | |
01.117.139 | Plate for the osteosynthesis of pelvic bones (curved R=108 mm – 10 holes) | |
01.117.160 | Plate for the osteosynthesis of pelvic bones (curved R=108 mm – 12 holes) | |
01.117.178 | Plate for the osteosynthesis of pelvic bones (curved R=108 mm – 14 holes) | |
01.118.050 | Plate for the osteosynthesis of spoke bone L=50 mm | |
01.118.062 | Plate for the osteosynthesis of spoke bone L=62 mm | |
01.118.074 | Plate for the osteosynthesis of spoke bone L=74 mm | |
01.119.055 | Plate for the osteosynthesis of spoke bone L=55 mm | |
01.119.062 | Plate for the osteosynthesis of spoke bone L=62 mm | |
01.119.079 | Plate for the osteosynthesis of spoke bone L=79 mm | |
01.119.053 | Ã-shaped plate for the osteosynthesis of shoulder’s neck L=53 mm | |
01.119.068 | Ã-shaped plate for the osteosynthesis of shoulder’s neck L=68 mm | |
01.119.080 | Ã-shaped plate for the osteosynthesis of shoulder’s neck L=80 mm | |
01.120.60 | Screw for the condulus and ankle-bones d=3,5 mm L=60 mm | |
01.120.80 | Screw for the condulus and ankle-bones d=3,5 mm L=80 mm | |
01.120.100 | Screw for the condulus and ankle-bones d=3,5 mm L=100 mm | |
01.120.120 | Screw for the condulus and ankle-bones d=3,5 mm L=120 mm | |
01.120.130 | Screw for the condulus and ankle-bones d=3,5 mm L=130 mm | |
01.121.70 | Skeletal traction pin d=1,0 mm L=70 mm | |
01.121.120 | Skeletal traction pin d=1,0 mm L=120 mm | |
01.121.250-1 | Skeletal traction pin d=1,5 mm L=250 mm | |
01.121.200-1 | Skeletal traction pin d=1,5 mm L=200 mm | |
01.121.300-1 | Skeletal traction pin d=1,5 mm L=300 mm | |
01.121.200-2 | Skeletal traction pin d=2,0 mm L=200 mm | |
01.121.250-2 | Skeletal traction pin d=2,0 mm L=250 mm | |
01.121.300-2 | Skeletal traction pin d=2,0 mm L=300 mm | |
01.121.400 | Skeletal traction pin d=2,0 mm L=400 mm | |
01.122.000 | Skeletal traction pin d=1,5 mm (with stop) | |
01.122.000 | Ilizarov’s skeletal traction pin d=2 mm (with stop) | |
01.122.210 | Clamp for skeletal traction ¹1 ( by CITO type) large | |
01.122.140 | Clamp for skeletal traction ¹1 ( by CITO type) medium | |
01.122.130 | Clamp for skeletal traction ¹1 ( by CITO type) small | |
01.123.00 | Clamp for skeletal traction ¹1 ( by CITO type) large | |
01.124.01 | Needle-shaped washer | |
01.125.01 | Patellar ligament clamp | |
01.125.02 | Patellar ligament clamp | |
01.126.18 | Plain chisel L=250 mm, width 18 mm | |
01.126.15 | Plain chisel L=250 mm, width 15 mm | |
01.126.12 | Plain chisel L=250 mm, width 12 mm | |
01.126.08 | Plain chisel L=250 mm, width 8 mm | |
01.126.04 | Plain chisel L=250 mm, width 4 mm | |
01.127.50 | Plain chisel with fixator L=250 mm, width 50 mm | |
01.127.45 | Plain chisel with fixator L=250 mm, width 45 mm | |
01.127.40 | Plain chisel with fixator L=250 mm, width 40 mm | |
01.127.30 | Plain chisel with fixator L=250 mm, width 30 mm | |
01.127.25 | Plain chisel with fixator L=250 mm, width 25 mm | |
01.127.20 | Plain chisel with fixator L=250 mm, width 20 mm | |
01.128.12 | Gouge, width 12 mm, L=200 mm | |
01.128.20 | Gouge, width 20 mm, L=200 mm | |
01.128.35 | Gouge, width 35 mm, L=200 mm | |
01.128.45 | Gouge, width 45 mm, L=200 mm | |
01.129.01-01 | Surgical mallet, m=0,5 kg | |
01.129.01-02 | Surgical mallet, m=1,0 kg | |
01.129.01-03 | Surgical mallet, m=1,5 kg | |
01.129.01-04 | Surgical mallet, m=2,0 kg | |
01.129.01-05 | Surgical mallet, m=3,0 kg | |
01.130.01 | Pin stretcher | |
01.130.02 | Pin stretcher | |
01.131.03-01 | Microplate, straight (4 holes) L=50 mm | |
01.131.03-02 | Microplate, straight (4 holes) L=18 mm | |
01.131.04-01 | Microplate, L-shaped (4 holes) L=18 mm | |
01.131.04-02 | Microplate, L- shaped (4 holes) L=22 mm | |
01.131.05 | Microplate, straight (6 holes) L=40 mm | |
01.131.06 | Microplate, straight (4 holes) L=35 mm | |
01.131.07 | Microplate, straight (4 holes) L=22 mm | |
01.131.08 | Microplate, Õ- shaped (6 holes) L=28 mm | |
01.132.005 | Screw d=1,5 mm, L=5 mm | |
01.132.010 | Screw d=1,5 mm, L=10 mm | |
01.132.015 | Screw d=1,5 mm, L=15 mm | |
01.133.01 | Mesh plate (50 x 50) mm | |
EXTERNAL FIXATION DEVICES |
02.200.00 | Apparatus for the osteosynthesis of long bones ( by Ilizarov’s type ) | |
02.201.80 | Semi-ring d=80 mm | |
02.201.100 | Semi-ring d=100 mm | |
02.201.110 | Semi-ring d=110 mm | |
02.201.120 | Semi-ring d=120 mm | |
02.201.130 | Semi-ring d=130 mm | |
02.201.140 | Semi-ring d=140 mm | |
02.201.150 | Semi-ring d=150 mm | |
02.201.160 | Semi-ring d=160 mm | |
02.201.180 | Semi-ring d=180 mm | |
02.201.200 | Semi-ring d=200 mm | |
02.201.220 | Semi-ring d=220 mm | |
02.201.240 | Semi-ring d=240 mm | |
02.202.110 | Ring d=110 mm | |
02.202.120 | Ring d=120 mm | |
02.202.130 | Ring d=130 mm | |
02.202.140 | Ring d=140 mm | |
02.202.150 | Ring d=150 mm | |
02.202.160 | Ring d=160 mm | |
02.202.180 | Ring d=180 mm | |
02.203.40 | Pin with slot d=6 mm L=40 mm | |
02.203.60 | Pin with slot d=6 mm L=60 mm | |
02.203.80 | Pin with slot d=6 mm L=80 mm | |
02.203.100 | Pin with slot d=6 mm L=100 mm | |
02.205.60 | Pin d=6 mm L=60 mm | |
02.205.80 | Pin d=6 mm L=80 mm | |
02.205.100 | Pin d=6 mm L=100 mm | |
02.205.120 | Pin d=6 mm L=120 mm | |
02.205.150 | Pin d=6 mm L=150 mm | |
02.205.200 | Pin d=6 mm L=200 mm | |
02.205.250 | Pin d=6 mm L=250 mm | |
02.205.300 | Pin d=6 mm L=300 mm | |
02.205.350 | Pin d=6 mm L=350 mm | |
02.205.400 | Pin d=6 mm L=400 mm | |
02.201.100 | Telescopic rod L=100 mm | |
02.201.150 | Telescopic rod L=150 mm | |
02.201.200 | Telescopic rod L=200 mm | |
02.201.250 | Telescopic rod L=250 mm | |
02.201.01 | T-shaped post | |
02.201.02 | Bracket with the treaded holes (2holes) | |
02.201.03 | Bracket with the treaded holes (3holes) | |
02.201.04 | Bracket with the treaded holes (4holes) | |
02.201.05 | Bracket with the treaded tail (2holes) | |
02.201.06 | Bracket with the treaded tail (3holes) | |
02.201.07 | Bracket with the treaded tail (4holes) | |
02.201.08 | Ring’s segment | |
02.201.135 | Strap with the treaded tail piece L=135 mm | |
02.201.175 | Strap with the treaded tail piece L=175 mm | |
02.201.215 | Strap with the treaded tail piece L=215 mm | |
02.201.235 | Strap with the treaded tail piece L=235 mm | |
02.201.09 | Loop-screw for the hinge | |
02.201.09-01 | Loop-nut for the hinge | |
02.201.35 | Protruded connection plate L=35 mm | |
02.201.45 | Protruded connection plate L=45 mm | |
02.201.55 | Protruded connection plate L=55 mm | |
02.201.65 | Protruded connection plate L=65 mm | |
02.201.75 | Protruded connection plate L=75 mm | |
02.201.85 | Protruded connection plate L=85 mm | |
02.201.95 | Protruded connection plate L=95 mm | |
02.201.105 | Protruded connection plate L=105 mm | |
02.201.115 | Protruded connection plate L=115 mm | |
02.201.135 | Protruded connection plate L=135 mm | |
02.201.155 | Protruded connection plate L=155 mm | |
02.201.335 | Protruded connection plate L=335 mm | |
02.201.45 | Twisted plate L=45 mm | |
02.201.60 | Twisted plate L=60 mm | |
02.201.85 | Twisted plate L=85 mm | |
02.201.10 | Ñoupling | |
02.201.20 | Ñoupling with internal thread L=20 mm | |
02.201.30 | Ñoupling with internal thread L=30 mm | |
02.201.40 | Ñoupling with internal thread L=40 mm | |
02.201.60 | Ñoupling with internal thread L=60 mm | |
02.201.10 | Bolt Ì6 L=10 mm | |
02.201.16 | Bolt Ì6 L=16 mm | |
02.201.30 | Bolt Ì6 L=30 mm | |
02.201.11 | Nut Ì6 for S=10 wrench | |
02.201.12 | Washer S=1,5 mm | |
02.201.13 | Washer S=2,0 mm | |
02.201.14 | Washer S=4,0 mm | |
02.201.16 | Washer with slot | |
02.201.17 | Ðin fixating bolt with opening | |
02.201.18 | Ðin fixating screw with slot | |
02.202.00 | Device for extrafocal osteosynthesis | |
02.203.00-1 | The rod apparatus for the functional treatment of diaphyseal fractures of hip, with composite external sustentaculum | |
02.203.00-2 | The rod apparatus for the functional treatment of diaphyseal fractures of shank composite external sustentaculum | |
02.203.00-3 | The rod apparatus for the functional treatment of diaphyseal fractures of upper arm and forearm with composite external sustentaculum | |
02.203.01-1 | Rod holder in assembly | |
02.203.01-2 | Rod holder in assembly | |
02.203.01-3 | Rod holder in assembly | |
02.205.00-1 | Rod apparatus “SKID-2” for hip | |
02.205.00-2 | Rod apparatus “SKID-2” for shank | |
02.205.00-3 | Rod apparatus “SKID-2” for upper arm and forearm | |
02.205.01-1 | Rod holder in assembly | |
02.205.01-2 | Rod holder ready-assembly | |
02.206.00 | Odinskiy's fall-tube for treatment of pelvic fractures and cotyloid cavity | |
02.207.00 | The rod apparatus for the functional treatment of diaphyseal fractures of pelvic bones | |
02.208.00 | External fixation device for the knee joint osteotomy | |
02.208.01 | Fixation device for the bar and rod | |
02.208.02 | Rod inserting wrench | |
02.208.03 | Troacar | |
02.208.04 | Rod compression and distraction apparatus for treatment of finger’s phalangeal bone fractures | |
02.208.05 | Rod apparatus for treatment of finger’s phalangeal bone fractures | |
02.208.06 | Rod apparatus for treatment of finger’s phalangeal bone fractures | |
VERTEBROLOGY |
Implants for reconstructive and decompression-stabilizing operations of spinal-brain traumas |
03.301.00 | “Kearny” system of internal transpedicular fixation of spinal column | |
03.301.26 | Notched plate (2 holes) | |
03.301.52 | Notched plate (3 holes) | |
03.301.68 | Notched plate (4 holes) | |
03.301.84 | Notched plate (5 holes) | |
03.301.100 | Notched plate (6 holes) | |
03.301.80 | Rod d=6 mm, L=80/60 mm | |
03.301.75 | Rod d=6 mm, L=75/55 mm | |
03.301.70 | Rod d=6 mm, L=70/50 mm | |
03.301.65 | Rod d=6 mm, L=65/45 mm | |
03.301.60 | Rod d=6 mm, L=60/40 mm | |
03.301.55 | Rod d=6 mm, L=55/35 mm | |
03.301.00-1 | Nut Ì6 (for wrench=9) S=3,5 mm | |
03.301.00-2 | Nut Ì6 (for wrench=9) S=4,5 mm | |
03.301.00-3 | Upper plate | |
03.301.00-4 | Washer, spherical | |
03.302.00 | “Symmetric” internal polysegment construction for treatment of scoliosis | |
03.302.01-1 | Pedicular hook (small) | |
03.302.01-2 | Pedicular hook (medium) | |
03.302.01-3 | Pedicular hook (large) | |
03.302.02-1 | Laminar lumbar hook | |
03.302.02-2 | Laminar lumbar hook | |
03.302.03 | Hook for transverse process of vertebra (left and right) | |
03.302.04 | Screw for the hook | |
03.302.05 | Nut M6 | |
03.302.06-01 | Cap nut Ì12 | |
03.302.07 | Lock screw | |
03.303.01 | Threaded bar in assembly | |
03.304.01 | Telescopic tie bar in assembly | |
03.305.40-01 | Transpedicular screw d=5,5 mm, L=40 mm | |
03.305.45-02 | Transpedicular screw d=5,5 mm, L=45 mm | |
03.305.40-03 | Transpedicular screw d=6,0 mm, L=40 mm | |
03.305.45-04 | Transpedicular screw d=6,0 mm, L=45 mm | |
03.305.45-05 | Transpedicular screw d=6,5 mm, L=45 mm | |
03.305.40-06 | Transpedicular cannulated screw d=5,5 mm, L=40 mm | |
03.305.45-07 | Transpedicular cannulated screw d=5,5 mm, L=45 mm | |
03.305.40-08 | Transpedicular cannulated screw d=6,0 mm, L=40 mm | |
03.305.45-09 | Transpedicular cannulated screw d=6,0 mm, L=45 mm | |
03.305.45-10 | Transpedicular cannulated screw d=6,5 mm, L=45 mm | |
03.306.40-01 | Transpedicular polyoxilated screw d=5,5 mm, L=40 mm | |
03.306.45-02 | Transpedicular polyoxilated screw d=5,5 mm, L=45 mm | |
03.306.40-03 | Transpedicular polyoxilated screw d=6,0 mm, L=40 mm | |
03.306.45-04 | Transpedicular polyoxilated screw d=6,0 mm, L=45 mm | |
03.306.45-05 | Transpedicular polyoxilated screw d=6,5 mm, L=45 mm | |
03.307.01 | Distracter | |
03.307.02 | Compressor | |
03.307.03 | Screw and hook holder | |
03.307.04 | Rod pusher | |
99.0.01 | Apparatus for the external correction and fixation of vertebral column - 'Halo' | |
03.308.00 | Diamant' system (the internal implant system for cervical spondylosyndesis) | |
03.308.01 | Plate for fixation of occipital bone | |
03.308.02-ë | Cervical mini plate | |
03.308.02-ï | Cervical mini plate | |
03.308.034-01 | Transpedicular screw L=34 mm d=3,5 mm | |
03.308.039-01 | Transpedicular screw L=39 mm d=3,5 mm | |
03.308.034-02 | Transpedicular screw L=34 mm d=4,0 mm | |
03.308.039-02 | Transpedicular screw L=39 mm d=4,0 mm | |
03.308.04-01 | Nut Ì7 | |
03.308.04-02 | Cup nut Ì7 | |
03.302.00-01 | Screw system for the internal transpedicular fixation | |
03.309.22 | Plate for anterior spine fusion (4 holes) L=22 mm | |
03.309.24 | Plate for anterior spine fusion (4 holes) L=24 mm | |
03.309.26 | Plate for anterior spine fusion (4 holes) L=26 mm | |
03.309.38 | Plate for anterior spine fusion (6 holes) L=38 mm | |
03.309.42 | Plate for anterior spine fusion (6 holes) L=42 mm | |
03.309.53 | Plate for anterior spine fusion (8 holes) L=53 mm | |
03.309.56 | Plate for anterior spine fusion (8 holes) L=56 mm | |
03.309.22 | Plate for anterior spine fusion with indents (4 holes) L=22 mm | |
03.309.24 | Plate for anterior spine fusion with indents (4 holes) L=24 mm | |
03.309.26 | Plate for anterior spine fusion with indents (4 holes) L=26 mm | |
03.309.38 | Plate for anterior spine fusion with indents (6 holes) L=38 mm | |
03.309.40 | Plate for anterior spine fusion with indents (6 holes) L=40 mm | |
03.309.42 | Plate for anterior spine fusion with indents (6 holes) L=42 mm | |
03.309.53 | Plate for anterior spine fusion with indents (8 holes) L=53 mm | |
03.309.56 | Plate for anterior spine fusion with indents (8 holes) L=56 mm | |
03.000.00 | Coritical srew d=3,5 mm L=16-20 mm | |
03.310.01 | Elliptical cage | |
03.310.008 | Cylindrical cage d=8 mm | |
03.310.010 | Cylindrical cage d=10 mm | |
03.310.012 | Cylindrical cage d=12 mm | |
03.310.014 | Cylindrical cage d=14 mm | |
03.311.01-01 | Neck-bone distracter(right) | |
03.311.01-02 | Neck-bone distracter (left) | |
03.312.01 | Device for surgical treatment for compression spine fractures | |
03.313 | Tool kit for stable anterior spine fusion (NPS - 50 operations) | |
03.313.143 | Lamellar chest fixator, L=143 mm | |
03.313.158 | Lamellar chest fixator, L=158 mm | |
03.313.120 | Lamellar lumbar fixator, L=120 mm | |
03.313.140 | Lamellar lumbar fixator, L=140 mm | |
03.313.01 | Lamellar lumbosacral fixator | |
03.313.120.02 | Lamellar thoracolumbar fixator, L=120 mm/ 2 | |
03.313.120.04 | Lamellar thoracolumbar fixator, L=120 mm/ 4 | |
03.313.140.02 | Lamellar thoracolumbar fixator, L=140 mm/ 2 | |
03.313.140.04 | Lamellar thoracolumbar fixator, L=140 mm/ 4 | |
03.314.01 | Device for the fixator application | |
03.315.01 | Wrench | |
03.316.80 | Plate «W L» L=80 mm | |
03.316.105 | Plate «W L» L=105 mm | |
03.316.130 | Plate «W L» L=130 mm | |
03.316.155 | Plate «W L» L=155 mm | |
03.316.180 | Plate «W L» L=180 mm | |
03.316.205 | Plate «W L» L=205 mm | |
03.316.230 | Plate «W L» L=230 mm | |
03.317.120 | Plate «R Ê» L=120 mm | |
03.317.160 | Plate «RÊ» L=160 mm | |
03.317.180 | Plate «R Ê» L=180 mm | |
ENDOPROSTHESIS REPLACEMENT |
04.401.00 | Hemialloplastic hip endoprosthesis | |
04.401.01 | Stem of hip endoprosthesis | |
04.402.028-01 | Spherical joint with ceramic coating d=28 mm | |
04.402.030-01 | Spherical joint with ceramic coating d=30 mm | |
04.402.032-01 | Spherical joint with ceramic coating d=32 mm | |
04.403.01 | Intramedullar crus | |
04.404.01 | Modular component of endoprosthesis | |
04.405.050 | Anti protrusion inlay d=50 mm, internal d=48 mm | |
04.404.052 | Anti protrusion inlay d=52 mm, internal d=50 mm | |
04.404.054 | Anti protrusion inlay d=54 mm, internal d=52 mm | |
04.404.056 | Anti protrusion inlay d=56 mm, internal d=54 mm | |
04.404.058 | Anti protrusion inlay d=58 mm, internal d=56 mm | |
04.406.01 | Femoral endoprosthesis | |
04.402.03 | Device for knee arthrodesis | |
04.402.04 | Modular endoprosthesis of distal part of thigh-bone on a base of knee joint endoprosthesis | |
04.402.05 | Femoral component | |
04.402.06 | Conjuctive module of endoprosthesis | |
04.402.07 | Device for knee arthrodesis | |
04.402.07 | Device for knee arthrodesis assembly | |
04.403.01 | Shoulder joint endorosthesis | |
04.403.040 | Hemispherical sustentaculum of endoprosthesis d=40 mm. hemisphere | |
04.403.045 | Hemispherical sustentaculum of endoprosthesis d=45 mm hemisphere | |
04.403.050 | Hemispherical sustentaculum of endoprosthesis d=50 mm hemisphere | |
04.403.055 | Hemispherical sustentaculum of endoprosthesis d=55 mm hemisphere | |
04.403.060 | Hemispherical sustentaculum of endoprosthesis d=60 mm hemisphere | |
04.403.01 | Device for ankle-joint arthrodesis | |
99.0.02 | Modular endoprostheses shoulder arthroplasty | |
99.0.03 | Modular knee joint endoprostheses | |
04.404.02 | Hohmann extractor | |
04.404.03 | Hohmann extractor single toothed | |
04.404.04 | Hohmann extractor double toothed | |
04.404.05 | Kodmann extractor | |
04.404.06-Ï | Kodmann extractor right | |
04.404.07-Ë | Kodmann extractor left | |
04.404.07-01 | Surgical mallet, m=0,5 kg | |
04.404.07-02 | Surgical mallet, m=1,0 kg | |
04.404.07-03 | Surgical mallet, m=1,5 kg | |
04.404.07-04 | Surgical mallet, m=2,0 kg | |
04.404.07-05 | Surgical mallet, m=3,0 kg | |
04.404.08 | Oscillating saw with saw band set | |
04.404.09 | Battery powered oscillating saw with saw band set | |
04.404.10 | Phillips screwdriver | |
99.0.04 | Meniscotome | |
99.0.05 | Gigli saw assembly | |
99.0.06 | Single-tooth hook for fixation of bone fragments | |
Sterilization equipment |
99.0.07 | Box ÊÑÊ-3 (all sizes, listed price for max. size) | |
99.0.08 | Box ÊÑÊ-6 (all sizes, listed price for max. size) | |
99.0.09 | Fire sterilizer (all sizes, listed price for max. size) | |
99.0.10 | Sterilizer with electric heating (all sizes, listed price for max. size) | |
99.0.11 | Sterilizing box for the reamers (2 sizes, listed price for max. size) | |
Otorhinolaryngology tools |
99.0.12 | Voyachek's ear sonde | |
99.0.13 | Gag | |
99.0.14 | Sickle-shaped scalpel | |
99.0.15 | Hartman's set | |
99.0.16 | Ear funnel, large | |
99.0.17 | Ear funnel, middle | |
99.0.18 | Ear funnel, small | |
99.0.19 | Nose sonde | |